Temperature Valve Actuator Replacement - Left Side
Temperature Valve Actuator Replacement - Left Side
Removal Procedure
1. Remove the instrument panel (I/P) carrier. Refer to Instrument Panel Carrier Replacement (Instrument Panel Carrier Replacement).
2. Remove the air temperature actuator - left (1) retaining screws.
3. Disconnect the air temperature actuator - left electrical connector.
4. Remove the air temperature actuator - left.
Installation Procedure
1. Install the air temperature actuator - left (1).
Caution: Refer to Fastener Caution (Fastener Caution).
2. Install the air temperature actuator - left retaining screws and tighten to 1.9 Nm (17 in. lbs.).
3. Connect the air temperature actuator - left electrical connector.
4. Install the I/P carrier. Refer to Instrument Panel Carrier Replacement (Instrument Panel Carrier Replacement).
5. Recalibrate the air temperature actuator on vehicles equipped with automatic climate control (C68). Refer to Actuator Recalibration (Testing and Inspection).