Mode Actuator Replacement - Console

Mode Actuator Replacement - Console

Removal Procedure

1. Remove the console. Refer to Console Replacement (Console Replacement).
2. Remove the screw from the air outlet duct.
3. Remove the air outlet duct from the console.




4. Remove the rear mode actuator retaining screws.




5. Remove the rear mode actuator.

Installation Procedure




1. Install the mode actuator.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the screws to the mode actuator and tighten to 1.9 Nm (17 in. lbs.).
3. Install the air outlet duct to the console.
4. Install the screw to the air outlet duct and tighten to 1.9 Nm (17 in. lbs.).
5. Install the console. Refer to Console Replacement (Console Replacement).