Seat Cushion Outer Trim Panel Replacement

Seat Cushion Outer Trim Panel Replacement

Removal Procedure

1. Remove the 3 seat switch bezel mounting screws. Refer to Driver or Passenger Seat Adjuster Switch Bezel Replacement (Driver or Passenger Seat Adjuster Switch Bezel Replacement).




2. Remove the 3 trim panel retaining screws.




3. Remove the screws from the trim panel.
4. Remove the trim panel from the seat assembly.

Installation Procedure




1. Align the trim panel to the seat assembly.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the screws retaining the trim panel to the seat assembly and tighten to 3 Nm (26 in. lbs.)
3. Install the 3 seat switch bezel mounting screws and tighten to 3 Nm (26 ft. lbs.)




4. Install the screws in the trim panel.