Evaporative Emission Hose/Pipe Replacement - Chassis

Evaporative Emission Hose/Pipe Replacement - Chassis

Removal Procedure

1. Remove the evaporative emission (EVAP)/fuel hose/pipe assembly. Refer to Fuel Hose/Pipes Replacement - Chassis (Service and Repair).




2. Remove the EVAP purge pipe (1) from the fuel hose/pipe (2).

Installation Procedure




1. Install the EVAP purge pipe (1) to the fuel hose/pipe (2).
2. Install the EVAP/fuel hose/pipe assembly. Refer to Fuel Hose/Pipes Replacement - Chassis (Service and Repair).