LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2007 >> 9-7X L6-4.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Differential Assembly >> Service and Repair >> Removal and Replacement >> Rear Drive Axle >> Shims Inspection

Shims Inspection



Shims Inspection

Important:
* Do not reinstall the original cast iron production shims, if removed. Once the cast iron shims are removed from the axle housing, they must be replaced with service shims and spacers.

* If service shims were previously installed, the shims can be reused.


Inspect the shims for cracks and chips. Replace the damaged shims.

scientia non olet · About LEMON Manuals