Transmission Heat Shield Replacement

Transmission Heat Shield Replacement

Removal Procedure




1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the 2 bolts securing the transmission heat shield to the transmission.
3. Remove the transmission heat shield from the transmission.

Installation Procedure




1. Install the transmission heat shield to the transmission.

Notice: Refer to Fastener Notice.

2. Install the 2 bolts securing the transmission heat shield to the transmission.

Tighten the bolts to 17 Nm (13 ft. lbs.).

3. Lower the vehicle.