LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2007 >> 9-7X L6-4.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Assemble, Disassemble, and Installation >> Input Speed Sensor Removal

Input Speed Sensor Removal



Input Speed Sensor Removal




1. Remove the input speed sensor (ISS) retaining bolt (247).
2. Use a small tipped screwdriver to carefully pry the ISS wiring harness retaining brackets from the pump housing. Being careful not to damage retainer clips.
3. Remove the ISS assembly (250).

scientia non olet · About LEMON Manuals