LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2007 >> 9-7X L6-4.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Disassembly >> Crankshaft Rear Oil Seal and Housing Removal

Crankshaft Rear Oil Seal and Housing Removal



Crankshaft Rear Oil Seal and Housing Removal




1. Remove the crankshaft rear oil seal housing bolts.
2. Install two bolts (Jack Screws) into the threaded holes (1) to break the seal of the housing.
3. Remove the crankshaft rear oil seal housing.

scientia non olet · About LEMON Manuals