LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2007 >> 9-7X L6-4.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Disassembly >> Crankshaft Balancer Removal

Crankshaft Balancer Removal



Crankshaft Balancer Removal

Tools Required:

J 41816-2 Crankshaft End Protector




1. Remove the crankshaft balancer bolt.




2. Install J 41816-2 into the end of the crankshaft.

Important: Do not pull on outer edge of the crankshaft balancer.


3. Use a three jaw puller to remove the crankshaft balancer.
4. Remove J 41816-2.

scientia non olet · About LEMON Manuals