LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2007 >> 9-7X L6-4.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Assembly >> Crankshaft Rear Oil Seal Installation

Crankshaft Rear Oil Seal Installation



Crankshaft Rear Oil Seal Installation

Tools Required

J 44227 Rear Seal Installer




1. Use the plastic installation sleeve supplied with the new seal when installing a new seal.
Use J 44227 to install the crankshaft rear oil seal.
2. Remove J 44227.

scientia non olet · About LEMON Manuals