Liftgate Lock Striker Replacement

Liftgate Lock Striker Replacement

Removal Procedure




1. Open the liftgate.
2. Using a grease pencil, mark the position of the liftgate striker to the body.
3. Remove the bolts that retain the liftgate striker to the body.
4. Remove the striker from the body.

Installation Procedure




1. Install the striker to the body and position as previously marked.

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the bolts that retain the striker to the body.

Tighten the bolts to 25 Nm (18 ft. lbs.).

3. Adjust the striker, if necessary.
4. Close the liftgate.