Rear Bumper Fascia Reinforcement Replacement

Rear Bumper Fascia Reinforcement Replacement


Removal Procedure

1.Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement Rear Bumper Fascia Replacement .





2.Unbend the rear bumper fascia reinforcement tabs.

3.Remove the rear bumper fascia reinforcement from the rear bumper fascia.

Installation Procedure





1.Install the rear bumper fascia reinforcement to the rear bumper fascia.

2.Insert the tabs into the slots.

3.Bend the tabs over the rear bumper fascia.

Bend the tabs flat against the bumper fascia. Do not allow the tabs to protrude over the top surface of the bumper fascia.

4.Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement Rear Bumper Fascia Replacement .