Menu "Adjustment"
MENU ADJUSTMENT DESCRIPTION CHART
| Function | Alternative | Description |
|---|---|---|
| Recall Service Message | The "Time for service" message is shown 20 times on the display whenever it is time for a service. After service, the message should be deleted. This can be done either by a command or by holding down the CLEAR button for 8 seconds. After adjustment, the SID display flashes to acknowledge the adjustment. |
|
| Outdoor Temperature | -5°C - +5°C | The outside temperature display can be altered 5°C. The SID reads the value from the sensor and presents this on the display. If the display is incorrect, it can be adjusted (changed) using this command. After adjustment, the SID display flashes to acknowledge the adjustment. |
| Day counter | ON (365 Days) ON (730 Days) OFF |
The counter indicates the number of days left to the next service. This command can be used to turn off the day counter so that the service indicator will be based on kilometers only. Normally, the mileage in km or 365 days (not V6 diesel) alternatively 730 days (V6 diesel only) will apply. After adjustment, the SID display flashes to acknowledge the adjustment. |