Menu "Activate"
NOTE:
When a system function is activated with the diagnostic tool, the control module executes a command that is not functionally normal. In activating mode, the diagnostic tool controls the control module, for which reason the activation command should be used with care. An activated function is always reset after exiting activation mode and another selection is made in the diagnostic tool's menu.
ACTIVATE - MENU
| Activate Activating | conditions | Description | Value |
|---|---|---|---|
| AHL Warning Lamp | Ignition ON | Controls lamp on/off irrespective of MIU input value. | ON/OFF |
| Headlamp Levelling Motor | Ignition ON | Values can be given for the level control motors. | 1-243 steps |