LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-5 Linear, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting And Signaling Systems >> Fault Diagnosis Fault Codes >> DTC B1240: Door Lighting >> Diagnostic help

Diagnostic help

Make sure the bulbs are of the correct rating.

If a lamp with too high a rating is fitted, diagnostic trouble code B1240 can be generated.

The overload protection is reset by turning the ignition OFF and then ON.

IMPORTANT: The DICE control module can be damaged if a bulb with incorrect rating is fitted.
scientia non olet · About LEMON Manuals