LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-5 Linear, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting And Signaling Systems >> Fault Diagnosis Fault Codes >> DTC B1220: Map Light >> Diagnostic help

Diagnostic help

Check that the wattage of the bulbs is correct.

If bulbs of too high a wattage are fitted, DTC B1220 can be generated.

To reset the overload protection, turn the ignition key to OFF and then back to ON.

IMPORTANT: The DICE control module can be damaged if a bulb of the wrong wattage is fitted.
scientia non olet · About LEMON Manuals