To remove

Fig 1: Illustration For Step 1-2

Courtesy of SAAB-SCANIA OF AMERICA, INC.

Undo the screws in the wheel housing, 2 on each side.
Open the boot lid.
Remove the scuff plate.

Fig 2: Illustration For Step 3
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fold away the luggage compartment carpet and remove the seals. The old seals must be discarded and replaced by new ones.

Fig 3: Illustration For Step 4-5
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Remove the nuts holding the bumper.
Together with an assistant, pull out the bumper from the clips and lift the bumper out backwards.

Fig 4: Illustration For Step 6
Courtesy of SAAB-SCANIA OF AMERICA, INC.
NOTE:
For cars equipped with Saab Parking Assistance (SPA):
- Unplug the connectors.
IMPORTANT: Be careful to avoid damaging the paintwork.