To fit

Fig 1: Illustration For Step 1-2

Courtesy of SAAB-SCANIA OF AMERICA, INC.

NOTE: For cars equipped with Saab Parking Assistance (SPA):

Place the bumper in position and press it over the edge of the wheel housing and the rear wing. Make sure that the clips sit correctly.
Put the nuts in place.
Position the bumper correctly and tighten the screws in the edge of the wheel housing.

Fig 2: Illustration For Step 3
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Tighten the nuts.

Fig 3: Illustration For Step 4-5
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit new seals and fold down the luggage compartment carpet.
Fit the scuff plate.

Fig 4: Illustration For Step 6
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit the luggage compartment carpet.
Close the boot lid and check the bumper fit.