LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-5 Linear, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Body - 9-5 >> Adjustment-Replacement >> Section of front wheel housing >> Removing

Section of front wheel housing: Removing

Fig 1: Illustration For Step 3-4
G03865653Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Remove the front wing.
  2. Remove the bumper member.
  3. Drill out the spot-welds from the outer wheel housing panel.
  4. Cut the wheel housing panel.
scientia non olet · About LEMON Manuals