LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-5 Linear, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Body - 9-5 >> Adjustment-Replacement >> Roof member, rear 5D >> Fitting

Roof member, rear 5D: Fitting

Fig 1: Illustration For Step 4
G03865729Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Grind all the surfaces that are to be welded.
  2. Apply welding primer to the surfaces that are to be welded.
  3. Position the roof member and fix it with a few welding clamps.
  4. Spot weld the roof member in place.
  5. Remove any remaining welding primer. Welding primer reduces adhesion of paint, filler and sealant.
  6. Fit the roof. See ROOF 5D 
scientia non olet · About LEMON Manuals