LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-5 Linear, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Body - 9-5 >> Adjustment-Replacement >> Roof 4D >> Removing

Roof 4D: Removing

Fig 1: Illustration For Step 2-3
G03865712Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Drill out the spot-welds.
  2. Grind down the welds holding the roof to the A and C pillars. Drill out or grind down the nuts for the carrier racks at the edge of the roof.
  3. Make a cut in the middle of the adhesive string between the roof and the outer side panel.
  4. Tap loose the roof and align any damaged sheet metal and panels.
scientia non olet · About LEMON Manuals