LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-5 Linear, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Body - 9-5 >> Adjustment-Replacement >> Rear bumper abutment 4D >> Removing

Rear bumper abutment 4D: Removing

Fig 1: Illustration For Step 2-3
G03865742Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Mount the car in an alignment bench and align if necessary.
  2. Drill out the spot-welds.
  3. Remove the abutment and align any damaged sheet metal or panels.
scientia non olet · About LEMON Manuals