LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-5 Linear, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Body - 9-5 >> Adjustment-Replacement >> Radiator crossmember >> Removing

Radiator crossmember: Removing

Fig 1: Illustration For Step 2
G03865641Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Remove the front wing.
  2. Drill holes into the spot-welds, grind off the welded joints and remove the radiator crossmember.
  3. Align the radiator crossmember mountings if necessary.
scientia non olet · About LEMON Manuals