LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-5 Linear, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Body - 9-5 >> Adjustment-Replacement >> Part of rear frame member >> Removing

Part of rear frame member: Removing

Fig 1: Illustration For Step 1
G03865757Courtesy of SAAB-SCANIA OF AMERICA, INC.

The rear bumper abutment and rear floor should be removed when the frame member is to be changed.

IMPORTANT: The frame member must only be cut and joined behind the marking as shown. If the damage extends further, the entire frame member must be replaced.
  1. Cut away the frame member and remove it.
scientia non olet · About LEMON Manuals