LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-5 Linear, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Body - 9-5 >> Adjustment-Replacement >> Front roof member >> Fitting

Front roof member: Fitting

  1. Grind all the surfaces that are to be welded.
  2. Apply welding primer to the surfaces that are to be welded.
  3. Position the roof member and fix it with a few welding clamps.
  4. Weld on the roof member.
  5. Remove any remaining welding primer. Welding primer reduces adhesion of paint, filler and sealant.
  6. Fit the roof.
scientia non olet · About LEMON Manuals