Menu "Read Values"
MENU "READ VALUES"
| Text | Unit | Min | Max | Description |
|---|---|---|---|---|
| Vehicle Speed (Wire from ABS / Bus from TC/ABS) | km/h | 0 | 255 | Wheel speed from ESP. Value from rear left speed sensor converted to km/h. |
| Engine RPM | RPM | 0 | 7000 | Shows current engine speed |
| Coolant Temperature | °C | -40 | 150 | Shows current coolant temperature. |
| Fuel Level | I | 0 | 75 | Shows fuel remaining in tank. Value from sensor internally converted to liters. |
| Fuel Level, Filtered | I | 0 | 75 | Shows fuel remaining in tank. Main instrument unit's internal filtered value. |
| Fuel Level (Sensor value) | V | 0 | 5 | Shows fuel remaining in tank, unit Volt. If the tank is empty, approx. 0.6 V, and if full approx. 3.6 V. |
| Fuel Used | I | 0 | 65 | Shows fuel consumption after ignition switch-on (used by trip computer). |
| Odometer | km | 0 | 200 000 |
Shows current odometer reading. |
| Tripmeter | km | 0 | 1000 | Shows current tripmeter reading. |
| LCD Illumination | % | 0 | 100 | Display lighting value in %. In the SID unit, calculated from the rheostat value and the value of the light intensity in the cabin. The value is changed by a fixed offset in the main instrument unit. |
| Instrument Lighting | % | 0 | 100 | Instrument lighting value in %. Rheostat value from the SID unit between approx. 5 and 100 %. When light intensity in the cabin exceeds a certain value or when the lights switch is OFF, the instrument lighting value is set to 0%. |
| Selector lever position indicator lamps | % | 0 | 100 | Shows brightness of selector lever position indicator, only on cars with automatic transmission. The main instrument unit uses the information on cabin light intensity. Two levels, approx. 50% or approx. 100%. |
| Telltale Dimming | % | 0 | 100 | Shows brightness of indicator and warning lamps. The main instrument unit uses information on cabin light intensity. 2 levels, approx. 50% or approx. 100%. |