Menu "Activate"
NOTE:
When a system function is activated with the diagnostic tool, the control module executes a command that is not functionally normal. In activating mode, the diagnostic tool controls the control module, for which reason the activation command should be used with care. An activated function is always reset after exiting activation mode and another selection is made in the diagnostic tool's menu.
MENU ACTIVATION CONDITION AND DESCRIPTION
| Activate Activating | condition | Description | Value |
|---|---|---|---|
| Speed | Ignition ON | Speedometer values can be given. Tolerance 0-4 km/h above actual speed in the 0-140 km/h range. Tolerance 0-6.2 km/h at speeds above 140 km/h. |
0-255 km/h |
| Engine speed | Ignition ON | Tachometer values can be given. Tolerance 2 % (140 RPM). |
0-7000 RPM |
| Coolant temperature | Ignition ON | Temperature gauge values can be given. Tolerance angle of 3 degrees. | 0-130 °C |
| Fuel level | Ignition ON | Fuel gauge values can be given. Tolerance angle of 3 degrees. |
0-75 I |
| Display lighting | Ignition ON | Display lighting values can be given. | 0-100 % |
| Instrument Lighting | Ignition ON | Instrument lighting values can be given. | 0-100 % |
| Telltale Dimming | Ignition ON | Values for the brightness of indicator and warning lamps can be given. | 0-100 % |
| Odometer | Ignition ON | Writes 888888.8, (all segments lit). | On/Off |
| Tripmeter | Ignition ON | Writes 888.8, (all segments lit). | On/Off |
| Selector lever position indicator lamps | Ignition ON | Select lever position. Control lamp brightness. Switch between lamps with selector lever. | 0-100% |
| Warning and Indication Lights | Ignition ON | Control all lamps in MIU on/off irrespective of initial value to MIU. | On/Off |