DICE uses the following information
DICE INFORMATION
| Information | Value/Units | Off | The value is dependent on the following sensor input, signal or function |
|---|---|---|---|
| LH rear light | ON/OFF | TWICE | The control module input is supplied with current from the light switch. DICE uses the information for the instrument lighting. |
| RH rear light | ON/OFF | TWICE | The control module input is supplied with current from the light switch. DICE uses the information for the instrument lighting. |
| Driver's door | OPEN/CLOSED | TWICE | Door switch. DICE uses the information to turn on/off the interior lighting. |
| Passenger's door | OPEN/CLOSED | TWICE | Door switch. DICE uses the information to turn on/off the interior lighting. |
| LH Rear Door | OPEN/CLOSED | TWICE | Door switch. DICE uses the information to turn on/off the interior lighting. |
| RH Rear Door | OPEN/CLOSED | TWICE | Door switch. DICE uses the information to turn on/off the interior lighting. |
| Boot lid | OPEN/CLOSED | TWICE | Door switch. DICE uses the information to turn on/off the luggage compartment lighting. |
| Hazard warning lights | ON/OFF | TWICE | Anti-theft alarm function and central locking function. DICE uses the information to activate/deactivate the hazard flashers for the car's anti-theft alarm. |
| A/C | ON/OFF | ACC | AUTO selected and outside temperature (bus from SID). DICE uses the information to turn on/off the car's A/C function. |
| Electrically heated rear window | ON/OFF | ACC | ACC sends A/C (ON/OFF). ON is sent when ECON is not selected, outside temperature exceeds 5°C and fan speed is lowest. This value is used by DICE. Note that there are several excluding conditions in DICE.
NOTE:
Because the outside temperature value is not permitted to rise unless vehicle speed exceeds 30 km/h, A/C will not be requested if the outside temperature was under 5°C before the car was driven into the workshop (See activation: Outside temperature 20°C).
|
| Rheostat level | 0-100% | SID | Rheostat control module input. DICE uses the information to control the brightness of the instrument and control lighting. |
| Rheostat Night Panel | 0-100% | SID | Rheostat control module input, reduced internally by a fixed value. DICE uses the information to control the brightness of button illumination when NIGHT PANEL is active. |
| Night panel | YES/NO | SID | Button. DICE uses the information on whether NIGHT PANEL is activated or deactivated. |
| Display lighting | 0-100% | SID | Rheostat control module input or light sensor. DICE uses the information to control the brightness of the display. |
| Ambient Temperature | °C | SID | Outside temperature sensor, control module adjustment. DICE uses the information to control the radiator fan and A/C. |
| Engine has started | ON/OFF | Trionic (petrol) ECM (diesel) | Crankshaft sensor. DICE uses the information to control the radiator fans. |
| Coolant temperature | -40-215°C | Trionic (petrol) ECM (diesel) | Engine coolant temperature sensor. DICE uses the information to control the radiator fan and A/C systems. |
| Wheel speed RL | 0--300 km/h | ESP | RL wheel speed sensor. |
| RHD | YES/NO | ||
| Washer fluid level low | YES/NO | SID | The washer fluid level sensor. DICE will not start the headlamp washer pump if the fluid level is low. |
| Diagnosis | Tech 2 | See BUS AND DIAGNOSTICS COMMUNICATION |