Anti-theft alarm

The car can be factory-fitted with an anti-theft alarm, of which there are two variants:

• Variant 1 comprises; door switches, bonnet switch, boot lid/tailgate switch and glass breakage sensor (4D) or glass breakage sensors (5D).
• Variant 2 consists of; as above plus a tilt sensor which trips the alarm if an attempt is made to steal a wheel.

The anti-theft alarm has a piezo-electric siren. The siren has an integral battery to ensure that the alarm can be given even if the power from the car's ordinary battery (car battery) is interrupted. The siren is located at the front of the LH front wheel housing.

The behavior of the alarm when tripped is market dependent and programmable.