To fit

Fig 1: Illustration For Step 1-3

Courtesy of SAAB-SCANIA OF AMERICA, INC.

Lift the tailgate into position and have a couple of assistants to hold the tailgate for you.
Adjust the tailgate, see TAILGATE 5D, ADJUSTMENT .
Tighten the bolts.
Insert the cables at the hinges.
Lay the cables in the cable ducting and close them. Screw on the cable ducting.

Fig 2: Illustration For Step 4-5
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Plug in the connectors and connect the washer line and ground cables.
Hold up the headlining and fit the load net holders, roof moulding, D-pillar trim and the moulding between the C and D-pillars. Fit the window moulding.

Fig 3: Illustration For Step 6
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit the hinge seals on the hinges and the cable channels on the hinges.

Fig 4: Illustration For Step 7
Courtesy of SAAB-SCANIA OF AMERICA, INC.