LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-5 Linear, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Doors & Locks - 9-5 >> Adjustment - Replacement >> Tailgate 5D, changing >> To fit

To fit

  1. Lift the tailgate into position and have a couple of assistants to hold the tailgate for you.
    2. Fig 1: Illustration For Step 1-3
    G03865987Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Adjust the tailgate, see TAILGATE 5D, ADJUSTMENT .

    Tighten the bolts.

  3. Insert the cables into the tailgate at the hinges.
  4. Fit the wiring harness to the tailgate and plug in the connectors and attach the washer hose.
    Fig 2: Illustration For Step 4
    G03865988Courtesy of SAAB-SCANIA OF AMERICA, INC.
  5. Fit the inner trim by inserting the clip at the door pull and fastening with the clips. Screw in the two door pull screws.
    Fig 3: Illustration For Step 5-6
    G03865989Courtesy of SAAB-SCANIA OF AMERICA, INC.
  6. Fit the window cover plate.
  7. Fit the cable channels and the hinge seals to the hinges.
    Fig 4: Illustration For Step 7
    G03865990Courtesy of SAAB-SCANIA OF AMERICA, INC.
scientia non olet · About LEMON Manuals