CLEAR button

The CLEAR button is used to delete a setting. To clear a message on SID, press the CLEAR button for about three seconds and it will disappear. If the message is in red, only the text can be deleted, the symbol cannot be cleared. Pressing the CLEAR button will make SIDC send a 5V 960Hz PWM signal with pulse ratio 80% from pin 4 to ICM pin 14.

The CLEAR button is used to delete a setting. To clear a message on SID, press the CLEAR button for about three seconds and it will disappear. If the message is in red, only the text can be deleted, the symbol cannot be cleared. Pressing the CLEAR button will make SIDC send a 5V 960 Hz PWM signal with an 81% pulse ratio from pin 4 to ICM pin 14.