LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-3 Linear, 2D Convertible, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Driver Information, Main Instrument Unit & SID - 9-3 >> Adjustment / Replacement >> SID control panel (SIDC) >> To remove

To remove

  1. Remove the Center air vent from the instrument panel by carefully bending the hooks that are accessible through the grille.
    Fig 1: Illustration For Step 1
    G03825582Courtesy of SAAB-SCANIA OF AMERICA, INC.
    NOTE: It is essential the correct hooks are bent as the hooks holding together the air vent are also visible through the grille.
  2. Remove SIDC by pressing together the two tabs on the back and then pressing out the control panel from behind, starting at the top.
    Fig 2: Illustration For Step 2-3
    G03825583Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Unplug the connector.
scientia non olet · About LEMON Manuals