Reset function
To reset the trip computer functions, hold down the CLR button for more than 4 seconds. Resetting to zero is indicated by a brief acoustic signal at the same time as the text "CLEARED" appears on the display for 2 seconds.
RESET FUNCTION
| Functions concerned are: | The display shows |
|---|---|
| Distance on remaining fuel | "x x x" km (miles) |
| Average fuel consumption | "- - -" |
| Average speed | "- - -" km/h (miles/h) |
| Distance to destination | 0 m ? |
NOTE:
The values programmed in DIST/ARRIV are not reset.