SID uses the following information
INFORMATION FOR SID
| Information | Unit | Sensor system | Description |
|---|---|---|---|
| Position lights | ON/OFF | DICE | The SID unit uses this information to calculate the rheostat value. |
| Rear Fog Light Broken | YES/NO | DICE | The SID unit uses this information for a CHECK message. |
| LH direction indicators | ON/OFF | DICE | The SID unit activates TICK-TACK for the direction indicator function. |
| RH direction indicators | ON/OFF | DICE | The SID unit activates TICK-TACK for the direction indicator function. |
| Sound | Acoustic information | DICE TWICE ACC Audio MIU PSM STC |
The SID unit activates the type of sound requested via the bus. |
| LH Rear Light Broken | YES/NO | TWICE | The SID unit uses this information for a CHECK message. |
| RH Rear Light Broken | YES/NO | TWICE | The SID unit uses this information for a CHECK message. |
| Left Brake Light Broken | YES/NO | TWICE | The SID unit uses this information for a CHECK message. |
| Right Brake Light Broken | YES/NO | TWICE | The SID unit uses this information for a CHECK message. |
| High Level Brake Light Broken | YES/NO | TWICE | The SID unit uses this information for a CHECK message. |
| Brake lights | ON/OFF | TWICE | The SID unit informs the driver via CHECK messages. |
| Horn | 0 : 6 : 42 | TWICE | The SID unit uses the information from TWICE and activates the horn for the requested period of time measured in ms as confirmation of "TSL" locking (Theft Security Lock). |
| Text Message | Text Information | TWICE ACC Audio STC MIU |
Text information from TWICE on the antitheft alarm function, ACC on the current programming, audio display, lower fuel level from MIU, soft top status from STC and warning for overheated oil in the gearbox. |
| RDS Time | Hours Minutes Seconds |
Audio | The SID unit uses the information in the time function (clock). |
| RDS Date | 1-31 | Audio | The SID unit uses the information in the time function (clock). |
| RDS month | January - December | Audio | The SID unit uses the information in the time function (clock). |
| Vehicle speed | km/h mph |
MIU | The SID unit uses the information for calculations for the trip computer function. |
| Engine coolant temperature (petrol) | -40 - 215°C | Trionic | The SID unit uses the information to calculate DTE. |
| Engine Started (petrol) | ON/OFF | MIU | The SID unit uses the information to calculate "Engine Off Time". |
| Fuel Consumed Since Start (petrol) |
0-65535 ml | MIU | The SID unit uses the information for calculations for the trip computer function. |
| Fuel level | Liters | MIU | The SID unit uses the information for calculations for the trip computer function. |
| Odometer reading | km, miles | MIU | The SID unit uses the information for calculations for the trip computer function. |
| Fuel Consumed Since Start (diesel) |
0-65535 ml | PSG 16 | The SID unit uses the information for calculations for the trip computer function. |
| Engine coolant temperature (diesel) | -40 - 215°C | PSG 16 | The SID unit uses the information to calculate DTE. |
| Engine Started (diesel) | ON/OFF | PSG 16 | The SID unit uses the information for the auxiliary heater and to calculate the "Engine off time". |
| Oil level Low (diesel) | ON/OFF | PSG 16 | The SID unit uses this information for a CHECK message. |
| Diagnostics communication | DICE Diagnostic tool See 3 |
5 Bus and diagnostic communication |