Procedures before dismantling the control module: Notes
WARNING: This page is about a different car, the 2003 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
The control module is sensitive to electrostatic discharges. In order to prevent damage to internal components in control modules, they must be changed very carefully in the following manner:
- Never touch the pins on a control module with your hands or clothes .
- Ground yourself by touching the car body/engine. Unplug the connector on the car's control module.
- Ground yourself by touching the car body/engine. Plug-in the connector on the car's control module.