Menu "Programming"
ALTERNATIVE DESCRIPTION
| Function | Alternative | Description |
|---|---|---|
| Speed Warning ME | OFF On |
In the ME market, it is a legal requirement for this function to be active. The SID generates an acoustic signal whenever vehicle speed exceeds 120 km/h or at 5 second intervals when the speed is continuously above 120 km/h. After adjustment, the SID display flashes to acknowledge the adjustment. |
| Service Indicator Message | Service Program 1 Service Program 2 Service Program 3, 5 Service Program 4 (US/CA) Service Program 6:1 Service Program 6:2 Service Program 7 |
The SID shows the message "Time for service" on the display when servicing is due. Type of service program is programmed into SID with this command. There are several service program types. After adjustment, the SID display flashes to acknowledge the adjustment. |
| Parking Heater Activation | Disabled Activation By Timer / Activation By Outside Temperature / Activation By Timer And Outside Temp |
If a parking heater is retrofitted, the SID must be programmed with one of the options depending on how the heater is to be activated. After adjustment, the SID display flashes to acknowledge the adjustment. |
| Parking Heater Type | Electrical Powered / Fuel Powered | There are two types of parking heater. For a particular type to work properly, it must be programmed in the control module. After adjustment, the SID display flashes to acknowledge the adjustment. |