Trip computer: General
There are two trip computer variants, SID 1 and SID 2.
The trip computers SID 1 and SID 2 have the following functions in common:
- TEMP (outside temperature)
- DTE (distance on remaining fuel).
- FUEL (average fuel consumption)
- SPD (average speed)
The SID 2 trip computer has the following additional functions:
- DIST (distance to destination)
- ARRIVAL (arrival time)
- ALARM (time alarm)
- SPD W (speed warning)
The trip computer is operated with the buttons under the display. To carry out the calculations required to display the above information, the SID uses the following information:
- Time, "own" clock
- Vehicle speed, unit km/h (mph)
- Fuel level, unit liter (gallon)
- Odometer reading, unit km (miles)
- Fuel consumption since starting, unit ml