Setting the year, month and day in SID 2.

Fig 1: Identifying Function Buttons SID 2

Courtesy of SAAB-SCANIA OF AMERICA, INC.

Select function "TEMP".
Hold down the SET button for more than 1 second, "year" begins to flash.
Select the year in steps down/up using the (Dot-) or (Arrow+) buttons (scroll down/up).
Press "SET", the year is stored in the SID unit.
"Month" begins to flash. Select in the same way as point 3.
Press "SET" to store the "month".
"Date" begins to flash. Select in the same way as point 3.
Press "SET" to store the "date".
The year, month and date are stored when SET or CLEAR is pressed, and when the ignition is turned off.