LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 Vector, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System - FOOTBRAKE System (Late; 9440) >> Adjustment - Replacement >> Procedures after disconnecting the battery

Procedures after disconnecting the battery

  1. Set the clock as follows:
    1. 1.a. Turn the ignition key to the ON position.
    2. 1.b. Press CUSTOMIZE on SIDC (SID control panel).
    3. 1.c. Turn the INFO knob until the displays shows "Clock/Alarm". Press to confirm "OK".
    4. 1.d. Turn the INFO knob to "Set Clock". Press "OK".
    5. 1.e. Turn the INFO knob to "Manual" or "RDS adjust" and set the correct time. Press "OK".
  2. Set the date as follows:
    1. 2.a. Turn the ignition key to the ON position.
    2. 2.b. Turn the INFO knob to "DATE".
    3. 2.c. Press the INFO knob until the display shows "YEAR 2000".
    4. 2.d. Turn the INFO knob to the correct year. Press to confirm "OK".
    5. 2.e. Turn the INFO knob to the correct month. Press "OK".
    6. 2.f. Turn the INFO knob to the correct date. Press "OK".
    IMPORTANT: Draw the customer's attention to the fact that all remote controls must be synchronized by placing the key/keys in the ignition lock. If this is not done, the remote control will not work.
  3. Synchronize the remote control's code by inserting the key in the ignition switch.
    WARNING: The trap protection is not active until the window lifters have been calibrated after a power failure.
  4. Cars with pinch protection:  Program the pinch protection.
scientia non olet · About LEMON Manuals