LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 Vector, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System - FOOTBRAKE System (Late; 9440) >> Adjustment - Replacement >> Brake hose >> To remove

To remove

NOTE: The following procedure applies to changing the brake hose on a front wheel. The same principle can be applied to hoses on the rear wheels as well.
  1. Depress the brake pedal slightly using a brake pedal clamp.

    Remove fuse 6 from the instrument panel electrical center 22. Instrument panel electrical center 22 (IPEC).

  2. Raise the car and remove the wheels on the side where the hose is to be changed.
  3. Detach the hose from the brake caliper.
  4. Remove the connection between the brake pipe and the brake hose.
  5. Plug the brake line.
  6. Release the clip and remove the hose.
scientia non olet · About LEMON Manuals