LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 Vector, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Telematics And Navigation (Late; 9440) >> Adjustment / Replacement >> DVD module (729), 4D >> To fit

To fit

  1. Fit the DVD unit but only press it in half way.
    IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION .
  2. Plug in the connector.
  3. Press in the DVD unit.
  4. Fig 1: Illustration For Steps 1 To 3
    G03618979Courtesy of SAAB-SCANIA OF AMERICA, INC.
  5. Cars with rear CD changer:  Fit the bracket.
  6. Fit the left hand inspection hatch.
  7. Refit the floor panel.
  8. Fig 2: Fitting Floor Panel
    G03618980Courtesy of SAAB-SCANIA OF AMERICA, INC.
  9. Close the luggage compartment.
  10. Carry out procedures after changing a control module.
  11. Carry out a function check.