Odometer/trip meter: Notes

The main instrument unit control module stores the distance covered and shows the mileage on the odometer display. The display has a six-digit counter which the control unit continuously updates from 000000 to 999999 km (or miles). The trip meter has a four-digit counter which starts at 000.0 and goes up to 999.9 km (or miles). The trip meter is zeroed when the ignition is turned to ON. The display will come on for 20 seconds if the reset button is pressed and the ignition is OFF so that the odometer reading is made visible.

Information on the driven distance is sent to the buses by the main instrument unit. The information is used by e.g. SID.