Menu "Read Values"
MENU "READ VALUES"
| Text | Unit | Min | Max | Description |
|---|---|---|---|---|
| Vehicle Speed (Wire from ABS/Bus from TC/ABS) | km/h | 0 | 255 | Wheel speed from ABS or TC/ABS. The value from the rear left wheel speed sensor converted to km/h. |
| Engine RPM | RPM | 0 | 7000 | Shows current engine speed |
| Coolant Temperature | °C | -40 | 150 | Shows current coolant temperature. |
| Fuel Level | I | 0 | 75 | Shows fuel remaining in tank. Value from sensor internally converted to liters. |
| Fuel Level, Filtered | I | 0 | 75 | Shows fuel remaining in tank. Main instrument unit's internal filtered value. |
| Fuel Level (Sensor value) | V | 0 | 5 | Shows remaining fuel in tank, unit volts. Approx. 0.6V for empty tank and 3.6V for full tank. |
| Fuel Used | I | 0 | 65 | Shows fuel consumption after ignition on (used by trip computer) |
| Odometer | km | 0 | 200 000 |
Shows current odometer reading. |
| Tripmeter | km | 0 | 1000 | Shows current trip meter reading. |
| LCD Illumination | % | 0 | 100 | Display lighting value in %. In the SID unit, calculated from the rheostat value and the value of the light intensity in the cabin. The value is changed by a fixed offset in the main instrument unit. |
| Instrument Lighting | % | 0 | 100 | Instrument lighting value in %. Rheostat value from the SID unit between approx. 5 and 100 %. When light intensity in the cabin exceeds a certain value or when the lights switch is OFF, the instrument lighting value is set to 0%. |
| Selector lever position indicator lamps | % | 0 | 100 | Shows the brightness of the gear position indicator, on cars with automatic transmission only. The main instrument unit used the information on the cabin light intensity. Takes 2 different values approx. 50% or approx. 100%. |
| Telltale Dimming | % | 0 | 100 | Shows brightness of indicator and warning lamps. The main instrument unit uses information on compartment light intensity. 2 levels, approx. 50% or approx. 100%. |