LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 Vector, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger System, Petrol (Late; 9440) >> Adjustment - Replacement >> Lower delivery pipe, charge air cooler >> To fit

To fit

IMPORTANT: To reduce the risk of hoses mounted on the delivery side of the turbocharger coming loose due to low friction at high air pressures, the hoses and connecting pieces must be cleaned thoroughly before fitting. Use a rag dampened with 93 160 907 Motip Dupli cleaning agent to wipe clean inside the ends of the hoses. Clean also the connecting pieces. If hose clips are rusty or damaged, they must be replaced with new ones to maintain the correct clamping force.
  1. Fit the hose and tighten the hose clamps.

    Tighten the bolts.

    Bolt tightening torque: 20 Nm (15 lbf ft) 

    Fig 1: Illustration For Step 1
    G03604539Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Fit the Spoiler shield, front.
  3. Lower the car.
scientia non olet · About LEMON Manuals