LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 Vector, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System - FOOTBRAKE System (Late; 9440) >> Adjustment - Replacement >> Brake pads, front, level 3 >> To remove

To remove

  1. Raise the car.
  2. Remove the wheel.
  3. Remove the retaining spring from the brake caliper by prying with a screwdriver while pressing the flat part of the spring.
    WARNING: Hold the retaining spring plate when removing the spring so that it can be loosened slowly. The spring can otherwise fly off with great force.
    Fig 1: Illustration For Step 3
    G03619304Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Press in the piston by prying with a screwdriver against the brake pad.
    Fig 2: Illustration For Step 4
    G03619305Courtesy of SAAB-SCANIA OF AMERICA, INC.
  5. Remove the protective covers and guide pins.

    Lift off the hydraulic body.

    NOTE: Be careful when handling the brake hose.
  6. Remove the brake pads from the hydraulic body.

    Clean the inside of the hydraulic body and check the dust covers.

scientia non olet · About LEMON Manuals