LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension (Early; 9400) >> Adjustment - Replacement >> Replacing the rubber bush in the rear damper >> To fit

To fit

Fig 1: Illustration For Step 2
G03582810Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Lubricate the bush and compression tool, if used, with petroleum jelly (Vaseline) or the like.
  2. Press in the compressed bush using 89 96 720 SLEEVE, REAR DAMPER BUSH  for support.
  3. Fit the damper.
scientia non olet · About LEMON Manuals