LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension (Early; 9400) >> Adjustment - Replacement >> Rear anti-roll bar, outer >> To fit

To fit

Fig 1: Illustration For Step 1
G03582804Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Position the anti-roll bar on the car and fit all retaining bolts.
  2. Tighten the bolts, using a torque wrench.

    Tightening torque 24 N.m (18 lbf ft) 

scientia non olet · About LEMON Manuals