LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Air Bag Restraint Systems) >> Removal & Installation >> Passenger-Side Air Bag Module >> Removal

Passenger-Side Air Bag Module: Removal

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .
  2. Passenger-side air bag module is located in right side of instrument panel. Remove bolts and expansion rivets securing glove box and pull glove box forward. Disconnect glove box light and set glove box aside. Remove side panel. Remove knee shield. Remove floor air duct and side air duct. Disconnect air bag connector. Remove screw holding safety band to steering beam. Remove 6 air bag retaining nuts. Lift out air bag. See Figure.