Fault Conditions
WARNING: This page is about a different car, the 2001 Saab 9-3 and 2000 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
A DTC will set:
- During monitoring if a malfunction is detected. ACC control module measures voltage every 40 milliseconds.
- When voltage measured at ACC control module 39-pin connector terminals No. 36 (Yellow/Green wire), No. 38 (Blue/Red wire on 2000 models; Red/Blue wire on 2001 models) or No. 39 (Yellow/Brown wire on 2000 models; Brown/Yellow wire on 2001 models) is more than 0.4 volt.